Sliding Table Saw & Vertical Panel Saw Guillotine Planner
Enforces strict edge-to-edge guillotine cuts (#1, #2, #3...) compatible with Altendorf, Felder, and Striebig panel saws.
1. Stock Sheet, Saw Kerf & Cut-List ScheduleZero Server Lag · 100% Browser CAD
| Part Label | Length | Width | Qty | Grain | Edge T/B/L/R |
|---|
⚙️ 3. GRBL 3-Axis CNC Router G-Code (.nc) Toolpath Setup
🪵 4. Rough Hardwood Board-Foot Calculator (T" × W" × L' ÷ 12)
From Cabinet Cut-List to Panel-Saw Sequence, AutoCAD R12 .DXF & GRBL G-Code in Seconds
Stop wasting $68–$115 sheets of cabinet plywood, Baltic birch, Euro melamine, and cast acrylic to manual math errors or cross-grain flips. SheetKerf CAD Studio computes kerf-compensated 2D Guillotine & Maximal-Rectangles layouts directly in your browser.
- True Blade & Endmill Kerf Physics: Exact 0.0–6.5 mm kerf subtraction + perimeter squaring trim across every sheet.
- Grain Lock & Edge-Banding Schedule: Zero cross-grain mistakes + automatic T/B/L/R PVC/veneer roll calculation (+8% shop trim).
- Shop-Ready CAD/CAM Exports: Single Project Pass ($9.90) or Pro Shop Unlimited ($15/mo) vs $45–$120/mo legacy CNC nesting seats.
Shop Engineering & Nesting Guide: Sliding Table Saw & Vertical Panel Saw Guillotine Planner
Enforces strict edge-to-edge guillotine cuts (#1, #2, #3...) compatible with Altendorf, Felder, and Striebig panel saws. Pre-calibrated stock: PLY_2440x1220 (mm mode, algorithm guillotine, blade/bit kerf 3.2 mm, perimeter trim 5.0 mm, default sheet cost $68.00).
Related Woodworking, Cabinet & CNC Nesting Calculators
- GRBL 3-Axis CNC Router Panel Profiling G-Code Generator — Generate ready-to-run GRBL .nc toolpaths with configurable spindle RPM, feedrate, multi-pass step-down, and holding tabs.
- CNC Compression Endmill & Router Bit Kerf Offset Planner — Account for 3.175mm (1/8 in), 6.35mm (1/4 in), and 9.525mm (3/8 in) CNC router bit diameters in nested part clearances.
- 4/4, 6/4 & 8/4 Rough Hardwood Board-Foot Cost Estimator — Price 4/4, 5/4, 6/4, and 8/4 kiln-dried oak, walnut, maple, and cherry lumber batches with waste allowance.
- American Face-Frame Cabinet Stile & Rail Linear Cut Optimizer — Optimize 8ft and 10ft solid maple/poplar face-frame stiles and rails using 1D First-Fit-Decreasing kerf math.
- Assembly Table & Torsion-Box Workbench MDF/Plywood Cut List — Generate dead-flat CNC/assembly torsion-box skins and internal egg-crate ribs with exact blade kerf compensation.
- 45-Degree French Cleat Wall Strip & Holder Sheet Calculator — Rip 18mm Baltic birch or 3/4-inch plywood into matched pairs of 45-degree French cleats and modular tool holders.
- Bathroom Vanity & Plumbing Drawer U-Cut Sheet Optimizer — Plan moisture-resistant plywood bathroom vanities, false sink fronts, and plumbing-clearance drawer boxes.
- 84-Inch & 96-Inch Tall Kitchen Pantry Cabinet Cut Planner — Nest full-height 84-inch to 96-inch tall pantry gables and pull-out tray shelves across 8ft or 10ft sheet stock.
Standard Plywood, Baltic Birch, MDF, Euro Melamine & Saw-Kerf Reference Matrix
Verified commercial panel dimensions, standard saw-blade & CNC endmill kerf widths, and board-foot equivalents:
| Stock Panel Type | Metric L × W (mm) | Imperial Size | Panel Area | 18mm Board Feet | Typical Blade / Bit Kerf |
|---|---|---|---|---|---|
| North American Cabinet Plywood | 2440 × 1220 mm | 96 × 48 in (4×8 ft) | 2.98 m² (32 sq.ft) | 24.0 BF | 3.2 mm (1/8" Table Saw) |
| Russian / Baltic Birch Multi-Ply | 1525 × 1525 mm | 60 × 60 in (5×5 ft) | 2.33 m² (25 sq.ft) | 18.75 BF | 2.2 – 3.2 mm Track/Panel Saw |
| Architectural Oversized MDF | 3050 × 1220 mm | 120 × 48 in (10×4 ft) | 3.72 m² (40 sq.ft) | 30.0 BF | 3.2 mm Saw / 6.35 mm CNC Bit |
| Euro Melamine MFC Jumbo | 2800 × 2070 mm | 110.2 × 81.5 in | 5.80 m² (62.4 sq.ft) | 46.8 BF | 3.2 – 4.4 mm Scoring Panel Saw |
| Cast Acrylic / ACM Signage | 2440 × 1220 mm | 96 × 48 in (4×8 ft) | 2.98 m² (32 sq.ft) | 8.0 BF (6mm) | 3.175 – 6.35 mm O-Flute CNC |